Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

叶片式预旋喷嘴出口流场实验研究

叶片式预旋喷嘴具有尺寸小,落后角大的特点。为了详细研究小尺寸预旋喷嘴的预旋性能,采用五孔探针对叶片式预旋喷嘴的出口流场进行了实验研究。测量了Ma=0.2,0.3时喷嘴出口的压力分布、速度分布和出口气流角度分布,实验获得了喷嘴的落后角和预旋效率,并进行了与实验工况相同的数值计算。通过实验获得的总压云图以及速度云图,可以发现叶片式预旋喷嘴的端壁二次流损失、尾迹损失严重,有明显的边界层分离现象。Ma=0.2时,喷嘴Re数为5.76×104,落后角2.84°,实验测得的预旋效率为0.73;Ma=0.3时,喷嘴Re数为1.06×105,预旋效率提高至0.77。实验模型端壁的影响使预旋效率实验结果偏低6.5%左右。数值结果与实验测得各参数符合较好:数值结果与测得的喷嘴出口截面平均总压、静压偏差在1%以内;出气速度、周向速度以及出气角度与实验结果偏差在4%以内。数值计算表明,叶片式预旋喷嘴的预旋效率基本不受压比影响,随Re数增大先增大后基本不变,最后基本稳定在0.85。     

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver's manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle's lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.     

空间推进器制造中的可破坏性工装

由于航天研究的特殊性,其预研型号零件一般批量很小,并且有许多零件不易装夹。选用一种不同于传统专用工装的可破坏性工装,其材料可以是金属的,也可以是非金属的。为保证进度,必须建立预先性的可破坏性工装的数据库。采用可破坏性工装缩短了研制周期,降低了研制成本。     

高校特色期刊自组稿模式、问题及对策——以《民办教育研究》的组稿模式为例

特色学术期刊在长期的办刊过程中，根据自身的特点合理运用组稿手段组织稿件、优化稿源而形成了能体现办刊理念、突出期刊特色的选题计划指导下的自组稿模式。这些模式各有其长，也各有其适应对象，在组稿中也会存在一些问题。因此在运用这些组稿模式时，还要注意学术期刊工作与高校学科建设和科研工作的互动；准确定位，科学把握内外稿的刊发比例，彰显学术期刊的特色；利用学术优势，发挥学术期刊的人才培养功能。     

减小固体火箭外壳板滚弯直线度误差的研究

如何减小固体火箭外壳板滚弯直线度误差是目前火箭生产工艺中的难题,在对最不利实际工况下三轴辊弯板机中心辊进给量沿自身轴线分布规律作系统的分析、计算及研究的基础上,推导出一项箭壳板滚弯直线度误差不等式,并针对此项不等式各参数变化规律,提出几项减小箭壳板滚弯直线度误差的行之有效的措施,可供火箭外壳设计及生产工艺人员参考。     

ERP在航天制造部门的实施初探

ERP是一种先进的生产管理系统,航天产品“小批量、多品种”的生产特点为ERP的实施提出了新的需求。文章介绍了ERP的特点、实施目的并根据航天某小型制造部门的生产特点,提出了实施措施及建议。只要各方协同努力,ERP在航天制造部门是能够成功发挥其应有作用的。     

Sustained data recording system based on disk array

Most sustained data recording systems in many real-time fields are based on tape equipments. We have developed an innovative sustained data recording system based on disk array which consists of Array Controller Module (ACM), String Controller Module (SCM) and Main Controller Module (MCM). This system has a better performance and higher reliability than the traditional tape recorder and can be used conveniently in many areas of data recording, storing, playback, and remote backup. This novel recording system has been used in radar data recorder for spacecraft orbit tracking and satellite remote sensing data recording successfully.     

现场动平衡技术在生产中的应用

利用美国恩泰克公司提供的DP1500数据采集仪及现场动平衡软件,以实例说明了现场动平衡技术在锅炉引风机、排粉风机、电动机、机泵等转动设备不平衡故障排除中的应用,介绍了不平衡故障的识别方法,揭示出该技术在生产中的实用性、先进性和经济性.     

技能型人力资本创新的企业激励制度

技能型人力资本是创新型人力资本的一个重要类型,技能型人力资本决定着新技术向新产品的转化,是技术转化为现实生产力的重要因素,在技术创新中起着重要作用.要调动他们的创新积极性,充分发挥他们在技术创新中的作用,必须建立和完善针对他们的激励制度.提高物质待遇、加强培训、参与管理、精神激励是技能型人力资本激励的侧重点.